Today we introduce epoxy phenolic resin paint, which is a high-performance, high-crosslinking, two-component epoxy phenolic tank paint with outstanding heat and solvent resistance.
All surfaces to be coated with epoxy phenolic resin paint used in epoxy drum closure should be clean, dry, and free of contaminants. Prior to painting, all surfaces should be evaluated and treated according to the ISO 8504:2000 standard. Weld spatter should be removed as necessary and weld seams and sharp edges should be ground smooth. If there is grease, it should be cleaned with solvents according to SSPC-SP1.
Spray treatment: This product can only be applied to surfaces that have been sandblasted to achieve Sa2 1/2 (ISO 8501-1:2007) or SSPC SP10 standards. A surface roughness of 50-75 microns (2-3 mils) is recommended. Epoxy phenolic resin paint must be applied before steel surfaces oxidize. If oxidation does occur, the entire oxidized area should be re-sandblasted and meet the mentioned standards.
Surface defects exposed during sandblasting should be treated appropriately by grinding, filling, or other methods. Before oxidation occurs, epoxy phenolic resin paint (diluted with 10% epoxy thinner) can be used as a primer with a dry film thickness of up to 40 microns (1.5 mils). Alternatively, dehumidification equipment can be used to maintain the sandblasting effect. Detailed epoxy phenolic resin paint application procedures should be consulted before use.
Epoxy phenolic resin paint is usually specified as a three-coat paint system, with each coat thickness of 90 microns (3.6 mils) and a total dry film thickness of the paint system of 270 microns (10.8 mils). Exact specifications of the total dry film thickness depend on specific requirements for the final use.
Epoxy phenolic resin paint is suitable as an inner lining for storage and processing containers in petrochemical plants, resisting the corrosion of acidic crude oil with temperatures as high as 95℃ (203°F) and water from gas separators. It has good resistance to aromatic and aliphatic solvents.
New Product Launch-IBC CapJune 30, 2022To provide more packaging accessoires to more shipping containers, we are develping the IBC tote cap for customers.Made of high-density polyethylene for durable and long lasting use of long distance t...view
Research Progress Of Surface Treatment Technology Of Steel Drums Before PaintingJuly 1, 2022Metal packaging barrels are mainly used in the chemical, petroleum and coating industries, of which the petroleum and chemical industries account for more than 90%. The annual output of metal barrels ...view
Specification For Cold Rolled Steel Plates For Steel DrumsJune 30, 2022European Steel Drum Manufacturers Association (SEFA) recommendationsThe proposal was developed by the European Steel Drum Manufacturers Association (SEFA) in collaboration with supplier members of the...view
Types, Functions And Materials Of Transport PackagingJuly 1, 2022According to the level of packaging, one-piece packaging: also known as small packaging, individual packaging, is used to pack the packaging of goods, usually and commodities form a whole, in sales di...view
Classification of galvanized steelJuly 24, 2023Galvanized steel plate is divided into ordinary electrolytic plate and fingerprint resistant electrolytic plate. The fingerprint resistant plate is added to the ordinary electrolytic plate on the basi...viewVOCs Governance Potential Security RisksJuly 1, 2022In the process of VOCs governance, there are some security risks, if not accurately identified, it may cause a security accident. Combined with the common environmental protection transformation metho...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
