Installation And Operation Manual Of Open Steel Drum Closure
This is the installation instruction for 210 liter open drum closure, taking the clamp locking ring as an example.
1. The operator must wear appropriate gloves during the installation of the steel barrel locking ring.
2. Use the hoop, cap and washer individually which should be all matched with the steel drum, and do not mix them together while using.
3. Check that the gasket on the cover is correctly installed in the groove of the cover.
4. Place the cover on the steel drum and carefully fix the sealing washer at the barrel opening coil of the steel drum.
5. The tightening direction of the closer lever wrench is clockwise. Fix one end of the lever in a proper position with one hand and press the sealing ring down along the circumference of the cover until it is safely fixed at the coil at the barrel opening.
6. Slowly pull the lever until it is completely closed to the edge of the barrel hoop. Compress the washer to lock the end.
7. Fix the lever and barrel hoop hole with the sealing device.
Short comments: Once the open steel drum locking ring for liquid goods is installed, it should be already filled with goods and cannot be opened again during transportation. If it is opened before transportation to the destination, the sealing performance of the steel drum can not be guaranteed to comply with the provisions of the United Nations.
How long will water stay fresh in a plastic drum?April 29, 2024Water is essential for life, and ensuring its freshness and purity during storage is crucial for maintaining health and well-being. Plastic drums are a popular choice for storing water due to their af...view
What is Packaging? What does it do? Is it Really That Important?May 12, 2023The term packaging refers to the use of containers, materials, and auxiliary objects adopted by certain technical methods to protect products during the flow process, facilitate storage and transporta...view
The Oil Is Contaminated. Where's The Source?July 1, 2022In the process of engine operation, there may be fuel dilution, coolant leakage, excessive wear and other problems, these problems will cause some pollution and influence to the lubrication system, wh...view
Latest UN Marking Requirements For Open Steel DrumsJune 30, 20221. The UN mark of the open steel drum for the packaging of dangerous goods for export shall be printed on the side of the steel drum:2. "1A2"- Design Type: open steel drum3. "Y, X or Z&...view