The barrel-making materials must meet the following requirements:
(1) The barrel-making needs to use high-quality low-carbon steel, the material must have good plasticity and deformation stability, and the low-carbon steel with a carbon content of not more than 0.05% to 0.15% has good plasticity. The greater the elongation δ value, the greater the plasticity. The better, the smaller the yield ratio σs/σb, the better the plasticity. For plates with a thickness of 0.8~2mm, the standard grain size should be grade 5~99.
(2) The material should have the ability to resist pressure instability and wrinkle. This ability is related to the modulus of elasticity (E), the yield ratio and the plate thickness directivity coefficient r. When σs/σb is small, the ultimate deformation degree is large. The greater the r value, the greater the degree of deformation.
(3) The surface of the steel plate should be standard and clean, free from scratches, pitting, scratches, pores and shrinkage, and the flatness of the surface should meet the standard, without warpage, unevenness, and rust spots. Thickness tolerance and overall dimension tolerance should comply with national standards. For details, please refer to industry standard YB/T 055. For example, for cold-rolled and zinc-locked thin steel plates for 200L steel drums, the allowable deviation of the chemical composition of the finished steel plates and steel strips should meet the requirements of GB/T 222-2006. The size measurement method of steel plate (strip) should meet the requirements of GB/T 708-2019. The re-inspection of steel plates shall be carried out in accordance with GB/T 247-2008.
Short comment: When making steel drums, you need to use good raw materials. At the same time, the drum closure of steel drums also needs to have good quality. The sealer provided by CX is made of high-quality steel and the surface is galvanized, which not only enhances the service life of the drum closure, but also prevents the sealer from rusting.
How long will water stay fresh in a plastic drum?April 29, 2024Water is essential for life, and ensuring its freshness and purity during storage is crucial for maintaining health and well-being. Plastic drums are a popular choice for storing water due to their af...view
Research Progress Of Surface Treatment Technology Of Steel Drums Before PaintingJuly 1, 2022Metal packaging barrels are mainly used in the chemical, petroleum and coating industries, of which the petroleum and chemical industries account for more than 90%. The annual output of metal barrels ...view
Flange in Blocked TankJune 19, 2023Today we will mainly introduce the flange in the drum closure, which is made of cold-rolled steel and is divided into 2-inch and 4/3-inch sizes for standard 55-gallon stainless steel drums. The surfac...view
Please Keep These Points in Mind When Handling Dangerous Chemicals!July 1, 2022On June 12, a vehicle leaked while unloading methyl formate from Sanqiang Xingxing Chemical Trading Co., Ltd. in Guiyang, Guizhou province, killing eight people and injuring three others, once again a...viewSuggestions On Risk Control Of Environmental Protection ReconstructionJuly 1, 2022In order to do a good job of risk control in environmental protection renovation, the following control measures are suggested:1. Comprehensive and accurate identification of various risks in the proc...view
Flow Hangs, The Ills in The Spraying Process!July 1, 2022In the process of paint construction, excessive paint in vertical or inclined areas and the formation of top-down flow traces or local film thickening flow falling phenomenon is called flow hanging.Th...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
